BTC Spectre NGEN Recoil M4 Mosfet v2 (for New Gun Purchases Only)

BTC Spectre NGEN Recoil M4 Mosfet v2 (for New Gun Purchases Only)

Price: £155.00      
Qty In Stock: Out of Stock
Out of Stock - Add to Notify List
Add to favourites

BTC Spectre NGEN Recoil M4 Mosfet v2 (for New Gun Purchases Only)

If you buy this with the Recoil Upgrade with your new gun purchase we will also refund £30 back to your paypal or card payment.

This way, when fitted by our engineers, we can still offer a 6 month warranty on the Spectre!

Due to the limited number of BTC NGEN mosfets available we have kept some stock back for fitting in guns at time of purchase.
Please do not ask us to sell them on their own, we are trying to end months of frustration for those of you wanting new guns, pre upgraded with
these Mosfets. 

Advanced Technology

  • Can handle power surges up to 9000 watts and even run on car batteries.
  • Fully computerized with hi-speed dual ARM Cortex-M0 and PIC18F26K22 microprocessors.
  • Multiple internal layers of heavy copper traces for greater current capacity.
  • Short circuit detection and voltage spike suppression circuits to protect the controller.
  • Smart thermal management reduces heat buildup during sustained firing on certain settings.

Smartphone Bluetooth Interface

  • Quickest and most versatile method of programming AEGs. No complex trigger inputs or opening the AEG.
  • Program your AEG mid-skirmish in seconds without any tools or manual, just your smartphone only.
  • User-programmable passcode and a shortened signal range prevents any unauthorized setting changes.
  • No need to "pre-connect" to the Spectre in the smartphone's settings. Is accessed instantly from within the app.
  • Fully certified by the FCC (USA), IC (Canada), CE (Europe), and 日本電波法 (Japan).

Essential App for Techs

  • Smartphone app reports battery voltage, current draw, and FET temperature. Basically a "wireless multimeter".
  • Reports timing of shot cycles and RoF, which helps fine-tuning the AEG to achieve the best possible cycle rate.
  • Diagnostic functions that display which microswitches are pressed in real-time and also what error has occurred.
  • Records total number of shots fired since the battery was connected and also for each trigger pull.

MOSFET Trigger

  • Eliminates damaging electrical arcing of the trigger switch contacts.
  • Lower resistance compared to mechanical switching, increasing motor current.
  • Driven by dual IRF671812PBF, a compact yet powerful next-gen MOSFET.

Dynamic Braking

  • Eliminates the motor spin-down time to prevent the piston from over-traveling.
  • Assists in keeping the piston properly reset to reduce stress on the gearbox.
  • Prevents double firing on semi-fire in extremely high RoF setups.
  • Also driven by dual IRF671812PBF MOSFETs.

Cycle Completion

  • Gearbox always completes the last cycle regardless of when the trigger is released.
  • Assists in keeping the piston properly reset to reduce stress on the gearbox.
  • The motor will always have the smoothest and most consistent startup.
  • Allows the anti-reversal latch to be removed.

Configurable Triple Fire Select

  • All three fire select positions can be individually configured, for a total of 729 (9x9x9) possible configs.
  • Available options for each selector position:
    • Safe
    • Semi fire
    • Auto fire
    • Burst [non-interruptible]
    • Burst [interruptible]
    • Burst/Auto hybrid [burst non-interruptible]
    • Burst/Auto hybrid [burst interruptible]
    • Semi/Auto hybrid
    • Semi/Auto ramping
  • Non-interrupt burst completes a burst even if the trigger is released, whereas interruptable stops mid-burst.
  • Burst modes can be programmed to fire 2 - 10 shots per burst. Each selector can have different burst amounts.
  • "Burst/Auto hybrid" fires in burst and switches to full auto if the trigger remains held down.
  • Hybrid modes can be programmed to have no transition delay or a 0.2s - 1s delay.
  • "Semi/Auto ramping" fires in semi and switches to full auto if the trigger is rapidly tapped.

Hardware Semi-Only Lock

  • Can only be enabled/disabled by using a soldering iron to remove/bridge a solder jumper.
  • Conforms to semi-only laws that forbid AEGs with readily accessible means of bypassing semi-only.

Realistic RoF Control

  • Both fire select positions can be individually configured with a different RoF.
  • Every cycle runs at full speed and pauses between each shot to reduce the RoF.
  • Provides the most realistic feel and sound compared to any other forms of RoF reduction.

Adjustable Precocking

  • Precocking stops the piston in a compressed state so the next shot is near-instantaneous.
  • The precocking is fully adjustable and thus also compatible with short-stroked pistons.
  • Offers improved realism and trigger response for sniper or low RoF builds.

Adjustable Firing Interval

  • After a semi or burst fire, ignores trigger inputs for a certain amount of time. Programmable up to 1s.
  • Helps restrict rapid firing in specialized builds, such as limiting a sniper build to firing one shot per second.
  • Lower intervals can also help prevent accidental "bump firing" on semi when using a feather trigger.

LiPo / LiFePO4 Monitoring

  • Monitors LiPo and LiFePO4 batteries to cutoff power before overdischarge occurs.
  • Simply set the number of cells and the controller will use the proper cutoff voltage.

Programmable Digital Fuse

  • Sensor-based current monitoring negates the need for a physical fuse.
  • Cutoff threshold fully adjustable to help protect low-output batteries from over-current damage.

Gearbox Reliability

  • Eliminates the trigger jam normally caused by the cutoff lever stopping at a certain position.
  • The cutoff lever mechanism is no longer needed, greatly reducing the chances of semi-fire related issues.
  • The anti-reversal latch can also be removed to make gearbox reassembly much easier.


APP and Manual available here 


Spectre Mk.II (Next-Gen V2 GB) Manual


Spectre Mk.II (Next-Gen V2 GB) Trigger Programming


Spectre Mk.I (Next-Gen V2 GB) Manual
(Previous Version, Discontinued)

  • Included Items
  • Specter FET (Next-Gen V2 Gearbox)
  • Labour
  • Deans-Tamiya Adapter
  • Product Manual

Reviews of this product

Recommended Products