Gate Electronics Mosfet switch NanoAAB Active braking
Gate Electronics Mosfet switch NanoAAB Active braking Gate Electronics Mosfet switch NanoAAB Active braking

Gate Electronics Mosfet switch NanoAAB Active braking

Reference: GE-PT-NanoAAB
Price: £29.00      
Qty In Stock: 2
Add to favourites
Description

Gate Electronics Mosfet switch NanoAAB Active braking.

NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.

MOSFET
Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you will gain higher rate of fire of the rifle and a faster trigger response, and the contacts will be protected against burn out.
 
Active Brake
Do you care about realism? Would you like to increase the life of the gearbox? Does your rifle have such high rate of fire that you are not able to make a single shot? Active brake will sort things out.
In SEMI Mode, the brake will not allow for compressing the piston after a shot. The piston will stop in front position which eliminates unnecessary stresses, increasing the service life of Gearbox and its parts. It is very important, especially with an AEG power upgrade.
After releasing the trigger, the rifle immediately stops shooting. Thus, you will gain more realism and, additionally, won’t lose your precious ammunition.
 
Electronic Fuse
A new MOSFET will never let you down on the battlefield. It is totally protected against overheating and short-circuits of the electrical system. In case of the rifle becoming jammed, it will protect the motor and the battery against any damage.
 
Digital Interface
It provides full compatibility with micro-switches. It is fully resistant to contact bounce. You gain a bigger ROF, faster trigger response and your MOSFET becomes less heated.
 
MOSFET of the 3rd Generation
Usage of most modern transistors and microcontroller enabled us to create the smallest and most reliable MOSFET in the market.
WE GUARANTEE that the MOSFET will work with the strongest AEG replicas. If you damage the MOSFET, we will reimburse you for 100% of your costs or replace it with a new one at our expense.
 
UPDATE
NanoAAB, NanoASR and MERF 3.2 are fully compatible with microswitches, as the digital Interface provides full compatibility with micro-switches. It is completely resistant to contact bounce. You gain a bigger ROF, faster trigger response and your MOSFET becomes less heated.
 
Normally the mosfet is installed near the battery. So if the battery is placed in handguard, the mosfet should be placed there as well.
 
We suggest to use mosfet with Active Brake, when aeg has blowback feature as it will work better.
 


Specification
  • Included in the kit:
  • Additional kit of Deans-T Connectors
  • Single signal wire for trigger contacts
  • Double signal wire for trigger contacts

Reviews of this product

Recommended Products