Fire Support

PDI Silencer Attachment 14mm (CCW) for Marui SIG SAUER P226.

14mm CCW screw attachment for SIG SAUER P226 made by Tokyo Marui. 
For installation it is necessary to have "Long barrel" with a genuine size inner barrel or more. (HI-CAPA 6 inch, 7 inch size) 

Easily expandability PDI attachment 
Three imone screws are arranged around three places, locked to barrel extended from all directions without bias. Prevents displacement of compensator, silencer, etc. due to blowback impact. Since the inner diameter of the attachment is produced at 8.7 mm, it is possible to hold the inner barrel securely and increase the collection rate. Since the inner barrel is SUS 304, there is no effect on inner diameter by tightening. However, please be careful with excessive tightening. 

The combination is as follows 
6 inch 01 inner barrel ... protrude about 12 mm from the tip of the attachment 
7 inch 01 inner barrel ... protrude about 37 mm from the attachment tip 

"Spec" 
■ Compatible models: Tokyo Marui SIG SAUER P 226 
■ Material: Duralumin 
■ Surface treatment: Black alumite 

"product description" 
For Tokyo Marui SIG SAUER P226. This has 14 mm screw (positive or negative) 
When you use this attachment, you need long inner barrel than normal one.

PDI Attachment ... Scalable 
You Can Fix This Attachment With Inner Barre By 3 Hole Of Screw. 
It Prevents Moving Of Conmpensatar And Silencer. 
The Inner Diameter Is 8.7Mm, It'S Tihgt And Hold Inner Barrel.So You Can Get More Accuracy. 
PDI Barrels Are Made Inner Of SUS304, So There Are No Worry About Effects On Inner. 
But Please Do Not Tight Up Too Strongly. 

6Inch 01 Inner Barrel ... Inner Barrel Sticks Out 12Mm. 
7Inch 01 Inner Barrel ... Inner Barrel Sticks out 37mm.